Case D: Fax with a distinctive ring service on the same
line
If you subscribe to a distinctive ring service (through your telephone company) that
allows you to have multiple phone numbers on one phone line, each with a different
ring pattern, set up your HP All-in-One as described in this section.
Back view of the HP All-in-One
1 Telephone wall jack
2 Phone cord supplied in the box with your HP All-in-One connected to the "1-LINE" port
To set up your HP All-in-One with a distinctive ring service
1.
Using the phone cord supplied in the box with your HP All-in-One, connect one
end to your telephone wall jack, then connect the other end to the port labeled "1-
LINE" on the back of your HP All-in-One.
Caution
If you do not use the supplied cord to connect from the
telephone wall jack to your HP All-in-One, you might not be able to fax
successfully. This special phone cord is different from the phone cords
you might already have in your home or office. If the supplied phone cord
Chapter 10
82
HP Officejet 7200 All-in-One series
Fax setup
is too short, see
The phone cord that came with my HP All-in-One is not
long enough
for information on extending it.
2.
Set the HP All-in-One to answer incoming calls automatically. Press the
Auto
Answer
button until the light is on.
3.
Change the
Answer Ring Pattern
setting to the pattern that has been assigned
to your fax number by the telephone company, for example, double rings or triple
rings.
For information on changing this setting, see
Change the answer ring pattern
(distinctive ringing)
.
Note
Your HP All-in-One is factory-set to answer all ring patterns. If you
do not set the correct ring pattern assigned to your fax number by the
telephone company, your HP All-in-One might answer both voice calls and
fax calls or it might not answer at all.
4.
(Optional) Change the
Rings to Answer
setting to one ring or two rings.
For information on changing this setting, see
Set the number of rings before
answering
.
5.
Run a fax test. For information, see
Test your fax setup
.
Your HP All-in-One will automatically answer incoming calls that have the ring pattern
you selected (
Answer Ring Pattern
setting) after the number of rings you selected
(
Rings to Answer
setting). Then it will begin emitting fax reception tones to the
sending fax machine and receive the fax.