Use the Embedded Web Server
The best way to manage the general network settings for the HP All-in-One is through
the HP All-in-One control panel. For more information, see
Use the HP All-in-One
control panel
.
However, for more advanced settings you can use the Embedded Web Server (EWS),
a network configuration tool you access from your web browser. The EWS enables
Chapter 13
140
HP Officejet 7200 All-in-One series
Set
up
your netw
ork
you to monitor status, configure HP All-in-One networking parameters, or access
HP All-in-One features.
For more information about features available in the EWS, see the onscreen help
within the Embedded Web Server. To access Embedded Web Server Help, open the
Embedded Web Server as described below, then click the Help link under Other
Links on the Embedded Web Server Home tab.
Tip
You can use the Embedded Web Server to check the amount of ink
remaining in the print cartridges. For more information, see
Check the
estimated ink levels
.
To access the Embedded Web Server
1.
Press
Setup
.
2.
Press
8
, and then press
1
.
This prints a configuration page for your HP All-in-One, including the IP address.
You will use the IP address in the next step.
3.
In the Address box in your web browser, enter the IP address of the HP All-in-
One, as shown on the network configuration page. For example,
http://195.168.0.5.
The Embedded Web Server Home page appears, showing the HP All-in-One
device information.
Note
If you are using a proxy server in your browser, you might need to
disable it to access the Embedded Web Server.
4.
If you need to change the language displayed in the Embedded Web Server, do
the following:
a.
Click the Settings tab.
b.
Click Select Language in the Settings navigation menu.
c.
In the Select Language list, click the appropriate language.
d.
Click Apply.
5.
Click the Home tab to access device and network information, or click the
Networking tab to access more network information or to modify network
information.
Note
Do not disable TCP/IP (Transmission Control Protocol/Internet
Protocol) on your computer. It is required for communication with the
Embedded Web Server.